Pages

Tampilkan postingan dengan label our. Tampilkan semua postingan
Tampilkan postingan dengan label our. Tampilkan semua postingan

Sabtu, 19 Maret 2016

Idea 19 an Italian Variation of our TLC19

In late 1988 I was commissioned by Nebe Boats in Cape Town to design a 19ft trailer-sailer of very modern image and capable of handling the very robust sailing conditions common to the Cape of Good Hope. The result was the TLC 19, a speedy and capable little boat with fractional rig, fine bow, long waterline and scoop stern. It also had transom-hung rudder and swing keel or fixed wing keel options.
TLC 19 sailing on False Bay
The TLC 19 hull plug later became the hull for Anthony Stewards boat for his circumnavigation. Anthonys epic voyage was completed in 1993 and to this day nobody else has accomplished his feat of sailing an open boat around the world. The endurance required to sail that distance and for that length of time in a tiny boat without cabin, sailing through whatever conditions nature could throw at him, is incredible to even consider.

Anthony Steward arrives home after circumnavigating.
Another version of the TLC 19 is being built in Italy and can be home-built from strip-wood construction methods. It has been developed by Christian Pilo and uses our hull but a different deck, rig and interior. It is named the Idea 19 and has proven to be a speedy and capable little cruiser/racer. More information is also available on the website of Nautikit, our Italian agents.

Idea 19 sailing in Italy.
 To see more of our designs, please visit our main website at  http://dixdesign.com/ 
or our mobile website at http://m.dixdesign.com/ .
Read More..

Sabtu, 12 Maret 2016

Sign Our Guest Book and or Register Your Yacht

We would like to hear from you. Please sign our new guest book, comment, discuss and/or register your Sparkman & Stephens Yacht. From this we will build a database of the yachts and their current locations.

Data will only be used to build our database. Numerous readers have introduced themselves as owners of S&S yachts through either the Comments field for a particular posting or through a direct email to us. We hope this is a simpler way to let us know where the S&S fleet is worldwide.

The database we will construct will be accessible by blog readers and will list yachts by LOA, design number, year, name and location. The database will not include the owners name nor contact information. For example:
Sailboats 40-60ft LOA
45-4", 125, Falcon, Castine, ME
47-9", 1976, Puffin, Thomaston, ME

And yachts that we know have been destroyed such as:
Sailboats 40-60ft LOA
50-3", 1534, Diogenes
55-8", 85, Avanti

Blog readers who wish to sign our guest book are welcome to do so. It is hoped this is a way blog readers can comment and respond to each other in a much easier format than using the Comments field within each blog posting.

All posts will be reviewed prior to going live. Please allow up to 24 hours to see your post. Thank you.

Read More..

Jumat, 11 Maret 2016

Kits for our Plywood Boats

Kits for our plywood boats have been available in USA for more than 10 years. This has had mixed success, depending on who was cutting the kits. Following on the sale of the company that had the rights to cut our kits, the quality of service deteriorated to a level that was no longer tolerable, so I rescinded the cutting rights. That brought us to the current arrangement of marketing the kits ourselves and sub-contracting the cutting to Chesapeake Light Craft in Annapolis.

This has worked out very well. The quality of the kits supplied to date has been excellent and the shipping has been both economically priced and efficient. They have cut numerous dinghy kits, including the Dixi Dinghy  and the Paper Jet.
Plywood Dixi Dinghy, fun little 3:1 dinghy to row/motor/sail.
The are currently preparing to cut a large kit, comprising 61 sheets of plywood, for a Didi 950 that will be shipped to a builder in Ohio. This is a radius chine plywood boat with topside chine that is designed to the Class 950 Rule and makes a very nice fast cruiser, in addition to its primary racing purpose.
3D image of radius chine plywood Didi 950
We have also sent them an order for a smaller but nevertheless substantial kit. This is for a Didi 29 Retro that will be shipped to a builder in North Carolina.This is also a radius chine plywood boat but without the topside chine. It is a development, in classic image, from our popular Didi 26 trailer-sailer design and will be rigged with the cruising rig option of the two gaff rigs that we supply with the design.
3D image of radius chine plywood Didi 29 Retro
I have reworked the panel files for these large kits so that all parts that are larger than a sheet of plywood are jointed with jigsaw joints. These joints are easy to assemble and produce very accurate panels.  Click to read about jigsaw joints.

The range of plywood kits that we can offer in USA is expanding fast. Click to see the full list. If there is a plywood design for which you want a kit, please email Dudley and ask for a price. It may take a week or two to rework the panel files to suit the Chesapeake Light Craft format then get a price for the kit but we will get that info to you as speedily as we can.

If you are outside of the USA, you can still order one of our kits from our suppliers in other countries .

To see our full range of boat designs, please visit http://dixdesign.com/
Read More..

Sabtu, 05 Maret 2016

Our Cape to Rio Race Wrap up

First off I want to say thank you to all friends, family and supporters for all of the good wishes that have poured in following our experiences in the Cape to Rio Race the past few days. The five crew of "Black Cat" are all very grateful for the assistance received. As is always the case, stories have varied depending on the source and they have no doubt expanded with the telling and retelling. I will tell it from the very personal point of view of being right there in the middle of the action.

The weather briefing two days before the race start told us there there was bad weather expected and their advice was to sail due west as fast as possible to get through the system to the high that would follow. That would give us SW winds that would turn S then SE. With my navigator, Dave (Wavy) Immelman, we decided to follow that advice as the most logical route. The weatherman warned about being in the SW quadrant of the storm that would follow a day or two later.

The race got off to a good start in light breezes, the course taking us around the perimeter of Table Bay. This was a good indicator for us of our chances of placing well in the race because we were very quick, and staying in the lead group of 4 smaller boats trailing the 3 big guns that led the fleet. Our group opened up a large gap from the others behind us.

We sailed through the first night in gradually strengthening wind that gave squalls of 20-25 knots. Around daybreak the squalls started to intensify and broke through 30 knots with 18-20 knots between them. Feeling a bit over-powered in the squalls we were reefing the mainsail when a squall of somewhat over 40 knots hit us. We were now entering the SW winds behind the front, so I changed from our westerly course to a NW heading, taking pressure off the sails. Despite that, the wind over the deck increased, with gusts of over 50 knots that shredded our new carbon jib, leaving us under main only.

While changing from the #1 jib to the smaller #3, we were running before and gaining speed rapidly. Wavy was standing on the foredeck at the forestay, hauling down the tatters of the jib when we took off down a wave, accelerating to 22 knots. The waves were very short and steep and we ran straight into the back of the next wave, washing Wavy aft against the shrouds, spraining his ankle and inflating his automatic life-jacket. At the same time the tiller went sloppy in my hands. Although "Black Cat" was running fast and straight down the wave she was doing it on her own, we had no steering.

We dropped all sail and elected to sit out the worsening conditions before setting up a jury rudder to take us back to Cape Town. "Black Cat" was comfortable and in no danger. While we waited we saw the German entry "Iskareen" sail past from behind. We thought that this very fast boat was ahead of us so it came as a surprise to see them come past from well astern.

The wind and sea moderated quite quickly from that first storm and we put our minds to making a jury rudder from lazarette floor boards. Sean Collins went over onto the sugar-scoop to screw and strap it to the stub of the rudder that remained below the pintels. It worked reasonably but we treated it gingerly for fear of breaking it. We motored on a heading for Cape Town but as the day progressed the conditions slowly deteriorated as a second storm started to move in. I saw that we were not going to lay Cape Town so elected to rather head for the closer and easier Saldanha Bay.

As evening approached this storm grew progressively more violent. We were in the SW quadrant of the storm about which the weatherman had warned us. We had no desire to be in that position at that time but we had no choice in the matter. Fate had placed us there and we could only do our best to cope with the situation as it developed.

Around dusk there was a massive bang, a noise that sounded like the boat being ripped apart. Sean had shouted a warning from the cockpit that I cant repeat in present company but none of us heard it. Suddenly we were upside down and the cabin was filled with flying bodies and objects that were loose in the cabin and also those that were inside closed and latched lockers. I had been sleeping on the starboard saloon settee and had only a few seconds earlier stood up to walk aft to the cockpit. I was still in the saloon and was hit on my face and top of my head by unidentified flying debris, leaving me with minor cuts and a black eye.

The noise of this impact was so great and our up-turned position so alarming that I thought that the keel had come off. I was on the cabin roof and looked up at the bilge, all cabin soles having fallen out. I saw no gaping hole as I expected but shouted "Everybody out!!", still thinking that we had no keel. This all happened in a few seconds, then suddenly she was upright again and I knew that we still had a keel. We were left with an awful mess of food packages, cabin sole panels, tumblers, containers and anything else that managed to find its way out of its allotted place. And there was water everywhere. There had been some in the bilge but a lot more had come in through the companion hatch and a hole that we had no yet identified.

With no instruction from anyone this very capable crew automatically set about sorting out the chaos, first picking up anything that could block the bilge pumps before starting to pump out the water. The day fridge, which had been bolted into the saloon table, had relocated itself to the settee on which I had been lying only 30 seconds earlier. Three fire extinguishers, mounted in brackets from which they are removed vertically, all fell out when we were inverted and flew across to the starboard side of the cabin. Only two of the five onboard were in steel straps with locking mechanisms that held them firmly in place, the other three fell out and became lethal missiles.

Next we discovered what the hole was that had appeared in the deck. During the inversion process the tail of the mainsheet went over the side and attached itself to the propeller and wound itself up to the point that it stopped the diesel motor. It had so much tension in it that the force downward on the upper guardrail wire punched the nearest stanchion through the 12mm plywood deck. That left a hole about 75mm diameter into the locker below, where my clothes were. From there the water spread itself all over the starboard aft cabin, soaking everything that Wavy and I had in that cabin. That was all of our clothes, bedding, camera bags etc.

Of more consequence, the volume of water that came into the boat spread itself over the chart table, the lid of which had ripped right off, and into the electrical panel and electronics. The two satellite phones and main VHF radio were drowned, leaving us with only a hand-held VHF of limited range with which to communicate. Smelling smoke, Wavy opened the electrical panel to see smoke coming out but it didnt develop into a fire.

Time stands still in these situations. I have no idea how long it took us to clean up the boat but she was back to a semblance of ship-shape before too long. The hole in the deck was plugged as well as possible with some muti that we had brought onboard the day before the race start.

In the midst of all this Sean came down from the cockpit and described what had happened. From inside the boat we had no idea, it was just massive noise and upside-downness.

Sean, a surfer like me, says that he suddenly felt the same feeling as when caught inside the impact zone of a big surf break, where you have no way of escaping the beating that is about to be dealt to you and you just have to take it on the head and cope with it. He did not see the wave coming but became aware of it as it loomed over the boat. It was very large and broke as a hollow tubing wave completely enveloping "Black Cat". She rose up the face of the wave, rotating as she rose until she was hanging from the roof of the tube. Then she fell or was thrown down the face of the wave with the mast going in first. The crash that I heard inside the boat must have been the cabin and deck hitting the water. While this was happening I also looked into the cockpit for Sean and he was hanging from a winch or whatever he had been able to grab as the wave reared up. I required that all crew be hooked on with safety harnesses before going on deck but Sean was hanging on so tight that his harness had no work to do.

This wave was much bigger and more violent than any others we had felt or seen. If that one could clobber us there may also be others, so we streamed warps from the bow and deployed the storm jib as a sea anchor to try to hold her bow-on to the waves. These did not seem to help much because the underwater current seemed to be pretty much the same speed as our drift. We didnt get her to lie more than about 20-25 degrees from broadside-on to the waves but it seemed to be enough to ease the motion a bit and cause other breaking waves to roll past the port quarter instead of hitting us amidships.

The worsening storm and loss of major communications prompted us to ask Cape Town Radio to put out a Pan-Pan message on our behalf to warn of our location in the shipping lane and to ask for the NSRI (National Sea Rescue Institute) to be called to our assistance. We advised that we were in no immediate danger but would appreciate assistance when it could be provided. We switched on the EPIRB to give a signal for rescue services to home in on. We had AIS onboard but it had flooded along with the other instruments at the nav table.

Initially the assistance came in the form of the fishing vessel "Miriam Makeba" heading our way. When they were still a few miles away the navy frigate SAS Isandlwana took over control of the widespread rescue efforts and released the fishing vessel to continue fishing. As the frigate approached in the rain they asked us to send up a flare, then another, to help them to locate us. Once they had located us we confirmed that we were in no immediate danger and they headed off to take care of people and boats that were in much more serious situations.

In the morning conditions again subsided. Wavy went over the side in his diving gear to free the mainsheet from the prop, which allowed us to restart the motor. At the same time he swam the length of the underbody to check for damage or other problems. A new and improved version of the jury rudder was fabricated from more plywood cannibalised from the lazarette and we continued on our journey toward Saldanha Bay at 4-5 knots under our own power. We were well set to reach there during the night.

Early afternoon the NSRI Rescue 3 arrived from Cape Town. They offered us the choice of continuing under our own steam to Saldanha Bay or accepting their tow back to Cape Town. Proceeding to Saldanha Bay presented logistical problems for crew and boat, so we took the tow and headed for Cape Town at 10 knots.

Manoeuvring into the RCYC basin proved to be more difficult than anticipated because the jury rudder boards added to the starboard side of the rudder severely limited rudder movement in that direction. Add a pomping SE gale and we sorely needed the welcoming hands on the dock to catch us as we came in at rather high speed and with negligible control.

Now "Black Cat" is safely back in port but she has some more patching to be done to her. This is for the hole in the deck from the stanchion and for the spot where her bow kissed the marina rather harder than necessary on our return.

My big question out of all of this was "Why did the rudder break?". It had a solid Iroko spine nearly 100mm thick and 150mm wide, extending top to bottom, with plywood fairing to leading and trailing edges. That is a massive piece of timber that can easily support a large car and really should not have been broken by a 22 knot surf. The answer came from the owner, Adrian Pearson. He told me that when "Black Cat" was squeezed between the steel RCYC marinas a few weeks ago when the mooring chains broke, it was not only the hull and keel that were damaged. He said that the rudder was also "graunched". If that is so, it may have started a fracture of the rudder spine that culminated in the blade shearing off at high speed.

We are all very disappointed that our race had to end this way. We were going so well and must have been in with a reasonable chance for a top result. Unfortunately, we will now never know. We are just glad to be back on land safely and are very grateful to NSRI and the crew of Rescue 3 for their part in it, as well as the "Miriam Makeba" and SAS Isandlwana.

I also want to thank the crew of "Black Cat" for being such great and capable shipmates, always ready to do the right thing and with a smile.

Adrian Pearson (owner)
Dave (Wavy) Immelman (Navigator)
Sean (Buttercup) Collins
Gavin (Doris) Muller

And a big thank you must also go to our  Didi 38 "Black Cat". She took a hammering on our behalf and came through with negligible structural damage.
Read More..

Rabu, 24 Februari 2016

Composite Construction for one of our Plywood Favourites

Here is some teaser information.

One of our popular plywood designs that has been around for a few years is about to be elevated in status. Tooling is soon to start in Australia for it to become a production boat. I will tell more about it in the next few weeks. For the moment, suffice to say that it is one of our most popular plywood designs and it will be available both as complete boats and as hull/deck/bulkhead kits for owner completion.

It is to be produced by a boatbuilder who has a depth of experience and knowledge spanning many years that will ensure quality products, strong and well-finished.

Watch this blog for more information in coming weeks. The design is being built in plywood by many amateur boatbuilders around the world, so I am sure that it will be popular as a GRP boat as well. Two boats are on order before the mould construction starts.

See our full range of designs for professional and amateur boatbuilders at http://dixdesign.com/.
Read More..

Sabtu, 13 Februari 2016

Our Boat for Cape to Rio 2014

A few weeks ago I announced that we will sail in the Cape to Rio Race in January. If you missed it, you can read it here. Now I would like to tell a bit more about the boat.

Her name is "Black Cat" and she is very special in my life. I designed her, I built her in my garden and I have sailed her across the South Atlantic three times. I have also raced and cruised her for many, many miles on the notorious Cape of Good Hope waters and she formed the foundation of my best selling range of boat designs. She is the prototype of the Didi 38 design and older sister to designs from the DS15 (Didi Sport 15) through to the DH550 .
"Black Cat" with her crew on launch day.
 I started concept sketches during the 1993 Cape to Rio Race on the Shearwater 39 "Ukelele Lady". "Ukelele" is very comfortable and carried us across the Atlantic in 29 days, excellent for a cruiser.  Still, I resolved part-way across  to do the next race on a boat of my own, which would be better able to take advantage of the downwind surfing conditions found on this race.

The new boat was to be cold-moulded wood. It was to be very light, with a big rig and deep bulb keel for high performance. Light and beamy boats are uncomfortable at sea and I sometimes get seasick, so I designed her relatively narrow for comfort. Narrow beam would also make her even faster.

I had nearly 3 years to build but I had a very big problem, I had no money to start. It was nearly a year before I had money to start building. Now the problem became a lack of time to build the cold-moulded boat, so I had to find an alternative solution that would be quicker to build.

My solution was to develop a method for building a rounded hull shape from plywood, using a radius chine form developed from my metal designs. I needed it to be mostly sheet plywood for fast construction but a rounded shape for performance, aesthetic and resale value reasons.

The resulting boat was 4 tons displacement in measurement trim and with 50% ballast ratio. She turned out to be clean, simple, pretty and a delight to sail. In two Cape to Rio Races she carried us across the Atlantic in 21 days in vastly different conditions. In one race she topped out as 18 knots and covered 250 miles in 24 hours. On the other her top speed was 22 knots but her 250 mile record went unbroken.

Where did her name come from? She is, after all, a yellow monohull and not a black catamaran. Black Cat is the top-selling peanut butter brand in South Africa and they sponsored her in the 1996 race. The kids knew her as the "Peanut Butter Boat" and her big  Black Cat spinnakers attracted a lot of attention.
Moving well in very light breeze.
She is quick on all headings in light breezes. The above photo was taken while racing on St Helena Bay in only 3-4 knots of breeze, a race in which she took line honours with a very comfortable lead over the 2nd placed boat, also a 38ft cruiser/racer.

She also loves to run free in a strong breeze. From cracked off on a fetch through to a run, she flies in strong conditions. Like me, she loves to surf. I surfed her at 22 knots down a very big wave mid-Atlantic after a storm.

Yet, she remains a home-built plywood boat and I look forward to spending 3 weeks with her and her crew as we cross the ocean once again. In the next few weeks I will write about the crew who will keep me and "Black Cat" company on this voyage.

To see our full range of designs, please visit http://dixdesign.com/ .

PS. Entries for the race currently stand at 26 boats, with another 19 pending. The race website is at http://www.cape2rio2014.com/ .

Read More..

Minggu, 07 Februari 2016

2014 Calendar of Our Designs

Our 2014 calendar is now at the printers and we will have the first stocks ready for shipping in a couple of weeks. Get your orders in and we will ship as soon as they come in, well in time for you to use as Christmas gifts or to hang on your wall come January 1st. Order here.

We have a nice selection of photos again this year. Here are the cover photo and a few months as samples of what it contains.
Cover of our 2014 Calendar
January
May
July
September
Thank you to all who have allowed us to use your photos. For other builders who are not featured, we have already started to collect photos for our 2015 calender. This is a good opportunity to show off what you have achieved, so please send them to me by email.

We have changed suppliers this year, in the interests of keeping the price reasonable. The supplier that we used in the past has hiked their prices way up and would have necessitated a considerable increase. With the new supplier we can hold the price at the same level as the past two years.

To see our range of boat designs, please go to http://dixdesign.com/ .
Read More..

Minggu, 31 Januari 2016

Our Schooner Race on Shearwater 45 Apella

The 25th running of the Great Chesapeake Bay Schooner Race proved to be a well-run and memorable event. The weatherman came close to creating big problems but it all worked out in the end. The massive cold front that tore apart parts of USA in the previous week arrived in Baltimore on Wednesday afternoon, dumping enough rain to wash out the planned Parade of Sail through Baltimores Inner Harbor. Other than that, everything went off with the usual smoothness of a well-practiced organisation.
"Apella" alongside "America II" at the start of the 2013 race.
Behind the wind-driven soaking of Wednesday, we were handed a couple of gorgeous days to carry us down to Portsmouth. The weatherman didnt get it all correct though. The forecast light breezes from the south at the start, swinging to westerly for most of the race, held only for the biggest and fastest boats at the front of the fleet. Behind them the wind was sometimes the opposite of the forecast and then fell apart into increasingly large holes that trapped boats for hours. The further back that they were in the fleet, the larger the holes and the longer they battled to get through.

As for us on Dan Halls Shearwater 45 "Apella", we had a pretty good race, one to store in the memory banks for recall in the coming cold winter days when only professional seamen and crazy people are out on the water. We had a good crew, comprising the owner, myself and a bunch of friends who are capable sailors.
Dan Hall, Dudley Dix, Paul Schaub, Dylan Bailey, Tom Miller & Scott Page.




We had a crazy start. Dan was on the helm, labouring under advice from Paul and myself that obviously conflicted with his own thoughts and must have been comical to anyone paying attention to us on nearby boats. Complicated by current, spectator boats and a big boat fleet that started 10 minutes before us but was mostly late to the line, we were dodging boats and going the wrong way within the last minute, yet still managed to cross the start line first, within 10 seconds of the gun and right at the committee boat. As Tom said, "sometimes too many chiefs actually works".
A Class gaff schooner "Hindu", which gave us some close-quarter racing.
We worked our way through much of the big boat fleet and had mostly good sailing all the way down the bay. Most of the time we were lying between 7th and 10th on the water and thoroughly enjoying what we were doing. A highlight of the race was twice managing to get ourselves ahead of the beautiful Baltimore clipper replica "Pride of Baltimore". When the wind came through after we broke out of the hole together, she sailed away from us.
Creeping up on the beautiful "Pride of Baltimore II".
We were in B Class, with our Windmill Point finish line 40 miles short of the Thimble Shoals line for the bigger boats in Classes A and AA. We planned to sail the optional additional 40 miles to claim "bragging rights" but gave up on that idea when the winds went light and onto the nose. Mission accomplished, we whimped out and motored the rest of the way to Portsmouth.

The awards party was today and we came away with first place in B Class, ahead of "Tom Bombadil". A great end to an enjoyable few days. Thank you to the crew of "Apella", all other competitors and especially to the organisers and volunteers who together made this such a successful event.
Tom, Dudley, Paul and Dan with the silverware. Scott & Dylan missed the party.
Dylan has promised to bring his Little Creek 47 "Flutterby" north from St Augustine, Florida, for the 2015 Great Chesapeake Bay Schooner Race and we will race the bay together again. I look forward to it.

To see our full range of designs, please visit http://dixdesign.com/.

Read More..