Pages

Kamis, 18 Februari 2016

Boarding Straps

I finally got around to adding Boarding Straps to Ellie.  This was long overdue, and I fully admit that sailing around without them for the past 3 years was a serious act of negligence on my part.

Especially considering how easy they were to make, and how well they appear to work.

I made my boarding straps from 1" nylon webbing.  The same stuff that cargo tie-down straps use.  I have a big bag full of tie-down straps, way more than I ever need, so I recycled two of them.

After doing some research, I found that 20" below the waterline is where they work best.  I formed the webbing into a big loop, ran the ends through two holes that I have in bulkheads 5 and 6, and tied the ends together.  Thats all there was to it.


I like the bright yellow color of the webbing.  I think it will be easy to see under water and in an emergency.  I will simply bunch the webbing under the side deck.  In the event of a capsize, the webbing will spill out onto the seat tops and should be easy to find.

I added one on each side of the boat.  I tested them in my driveway and was very pleased with how they worked.  It was much easier to get on board the boat than I thought, after only one attempt.  Heres a video.  Try not to laugh.  This is serious business.


I will do an on-the-water test, but I already feel relieved.

Related Posts by Categories

0 komentar:

Posting Komentar